Old pavers can look and sit like new again
Paver Restoration and Resealing in Fort Caroline, FL
Call (904) 637-8112 for a free estimate on repairing, refilling and resealing worn pavers at your Fort Caroline home.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Is paver restoration in Fort Caroline a quick fix or a two day job?
A local contractor can restore worn pavers at your Fort Caroline, FL home, and a reply reaches you within 1 business day, frequently much sooner. Plan on one to two days of work, since each step has to dry before the next. To get on the schedule, call (904) 637-8112.
If your driveway has dips, joints that keep emptying and a cloudy coat that peels in patches, sealer alone will not fix it. Restoration puts the base, the sand and the surface right, in that order, so the new coat has something solid to hold. Walk the property with the contractor and point out every trouble spot when you book your free estimate.
What does paver restoration include?
Restoration is a bundle of repairs, and not every property needs every part. The contractor looks first and then names only what your pavers need. To see which parts apply to yours, call (904) 637-8112.
Reset sunken pavers
Stones that dipped or rocked are lifted, the base is rebuilt and the pavers are set back level.
Strip failed sealer
Cloudy, peeling or bubbling coat is removed to the raw paver so a new one can bond.
Refill the joints
Empty joints get new sand, which locks the pavers together and slows weeds.
Reseal
A fresh coat goes on dry, clean pavers, in a finish that suits each area.
How can I tell my pavers need restoration instead of a simple reseal?
Look at the surface, then at the ground under it. Pavers that have turned white or hazy, peel in sheets or show bubbles point to a failed coat, and one Jacksonville company says a standard reseal will not fix those. Dips, rocking stones and gaps wider than a pencil point to the base or the sand. To have a contractor sort out which problem you have, book your free estimate.
Many homes in this part of town are mid-century ranches, and WJCT reports that houses from the 1950s and 60s are still standing across Arlington. A driveway added decades ago has seen more storms and more edge settling than a new one. Say how old your pavers are when you call (904) 637-8112.
What makes pavers sink or shift near the St. Johns River?
Water is usually the cause. Western Interlock says uneven soil drainage is the most common reason pavers sink, and that too much bedding sand can do it as well. Heavy summer rain also pulls sand out of joints, so low joints and sinking often travel together. For a look at where water goes on your lot, call (904) 637-8112.
A MetroJacksonville history notes that some Arlington land sits high, which gave early residents excellent drainage. Closer to the river and its creeks, the picture changes lot by lot, so the contractor should walk the downspouts and the slope before pricing the fix. To book that walk, book your free estimate.
How does the paver restoration process work from start to finish?
A restoration visit follows a set order, and skipping a step shows up within months. Safe Touch describes it as cleaning, re-sanding empty joints and sealing, over two days. Repairs and stripping add stops along the way. To see the order for your pavers, call (904) 637-8112.
1. Walk and diagnose
The contractor finds the cause of each dip and notes where the old coat has failed.
2. Lift and rebuild
Sunken stones come up, the base is refilled with gravel and tamped to grade, and bedding sand goes back level.
3. Strip and clean
Failed sealer is stripped to the raw paver, and the surface is washed clean.
4. Sand the joints
Fresh sand is swept in and compacted until the joints are full.
5. Dry, then seal
Nothing is sealed over dirt or damp pavers, so the coat waits for a dry surface.
6. Final walk
The contractor reviews the finished work with you and says when to walk and when to drive.
Does a failed sealer have to be stripped before resealing?
Yes, when it has turned white, hazy, peeling or bubbled. A Jacksonville stripping company says new sealer cannot bond to a peeling or cloudy surface, and that solvent based coats trap moisture in this humidity and turn white. Stripping runs from $350 for small areas to $3,400 or more for large ones. To find out what is on your pavers, book your free estimate.
When is replacing a paver better than resetting it?
Reset a stone that is sound and only sits low. Replace one that is cracked or broken through. A Jacksonville company says replacement is needed only for cracked or structurally damaged pavers, and prices it at $15 to $30 or more per square foot. That is why a short run of replacements costs far less than a new driveway. To count the damaged stones on yours, call (904) 637-8112.
What does paver restoration cost in Fort Caroline?
No company publishes one restoration price, so the number comes from its parts. Cleaning, sanding and sealing runs $1.75 to $3.25 per square foot around Jacksonville, according to Safe Touch. Stripping a failed coat adds $0.75 to $1.50 per square foot in a 2026 guide, and joint sand adds $0.25 to $0.75. For a number written for your pavers, book your free estimate.
Base repair is the wild card, since the cost depends on how much has sunk and why. A written quote should list the repair, the stripping and the sealing as separate lines. A bid under $1 per square foot almost always means prep was skipped, that 2026 guide warns. To compare a quote you hold, call (904) 637-8112.
| Restoration job | How the number is built | Estimate |
|---|---|---|
| 600 sq ft driveway, coat still sound | Clean, sand and seal at $1.75 to $3.25 | $1,050 to $1,950 |
| 600 sq ft driveway, failed coat stripped first | Clean, sand and seal plus $0.75 to $1.50 for stripping | $1,500 to $2,850 |
| 1,000 sq ft patio and pool deck, failed coat stripped | Same pieces over 1,000 sq ft | $2,500 to $4,750 |
| 20 sq ft of cracked or sunken pavers replaced | $15 to $30 or more per sq ft | $300 to $600 |
No Jacksonville company publishes one price for restoration, so this table is built from the pieces that are published: $1.75 to $3.25 per square foot to clean, sand and seal, $0.75 to $1.50 to strip, and $15 to $30 or more per square foot to replace pavers. Prices were read in November 2026. Base repair is priced after a contractor sees where the water goes.
When is a good season for restoring pavers in Fort Caroline?
Choose a dry stretch. Safe Touch says October and November are the drier window before winter, and Hydro Wash 360 sets the sealing window at October through February. Summer storms wash new sand out of open joints, and a damp surface can cloud a fresh coat. To plan around the forecast, call (904) 637-8112.
What do restored pavers look like around Fort Caroline?
Frequently Asked Questions
How long do paver sealers last?
Most coats last three to five years, a 2026 Jacksonville guide says, with driveways and pool decks closer to three and shaded patios closer to five. Another Jacksonville company puts it at two to three years. When the pavers drink water instead of beading it, the coat is done and restoration is the next step.
Why is paver sealing so expensive?
Restoration costs more than a first sealing because the surface has to be repaired before it is coated. Sunken spots, empty joints and a failed old coat all add steps. A Jacksonville guide adds $0.75 to $1.50 per square foot for stripping and $0.25 to $0.75 for joint sand.
What is a good paver sealer for Florida?
One that matches the paver and the spot. A 2026 Jacksonville guide separates film-forming sealers, which give a wet look, from penetrating ones that soak in and cost less up front. Another company warns that solvent based coats trap moisture in this humidity and can turn white. Ask the contractor to name the product.
How much should I pay for paver sealing?
Around Jacksonville, $1.75 to $3.25 per square foot is the published range to clean, sand and seal. Restoration can sit above it when stripping or base work is needed. A 2026 guide says bids under $1 per square foot usually skip prep, so ask what a low number leaves out.
How do you restore old pavers that have turned white or cloudy?
The failed coat comes off first. A Jacksonville company says white, hazy, peeling or bubbling sealer cannot be coated over, because new product will not bond to it. After stripping to the raw paver, the joints are refilled and a new coat goes on. Most standard jobs take one day.
Can sinking pavers in Fort Caroline be fixed without redoing the whole driveway?
Often yes. Western Interlock describes pulling only the sunken stones plus 12 to 16 inches around them, rebuilding the base with gravel, laying fresh bedding sand and setting the pavers back. The cause has to be found first, and drainage is the most common one.
Is stripping needed before pavers are resealed?
Only when the old coat has failed. Safe Touch says a failed coat is stripped first rather than coated over, and that sealing over dirt or wet pavers fails. If the coat is sound but worn, a clean, new sand and a fresh coat is usually enough.
How long before I can walk or drive on restored pavers?
One Jacksonville company allows walking after 24 hours and driving after 48 to 72 hours, depending on weather and product. Safe Touch calls restoration a two day job, not a same day spray, since the surface has to dry between steps.
Which neighborhoods near Fort Caroline can book paver restoration?
Every town below has a page, and a contractor who covers the east side can reach each one. If yours is not listed, call (904) 637-8112.
Are there other paver services I can ask about?
Restoration often pairs with another job on this list. Pick a guide, or call (904) 637-8112 for help choosing.
Ready to bring tired Fort Caroline pavers back?
Use the form or call, and a local contractor responds within 1 business day, frequently sooner.
Free, no obligation